830 nm thermal imaging platesetter with KODAK SQUARESPOT Imaging Technology, external drum
Throughput at 2400 dpi1,2
± 5 microns between two consecutive exposures on the same plate left on the drum
± 20 microns between 2 plates imaged on the same MAGNUS Platesetter, at largest plate size
± 25 microns between image and punches, when customer punches are used (at largest plate size)
Standard: XPO TIFF Downloader Software (included) connects to KODAK PRINERGY Workflow and most third-party workflow systems.
Maximum plate size: 3
950 x 1,163 mm
Maximum image area size:
938 mm x 1,163 mm
Minimum plate size: 3
330 mm x 305 mm
Minimum image area size:
318 mm x 305 mm
Size (H x W x D) / Weight
1 Imaging time is dependent on media sensitivity and screening type. All values are for media sensitivity of 90 mJ/cm2 ,with KODAK TRILLIAN SP Plates, screening of 175 lpi and plate width of 1,030 mm (40.55 in.)
2 Tested with KODAK Workflow.
3 Standard plate gauge is 0.15 to 0.3 mm (0.006 to 0.012in). For plate gauges 0.15 to 0.2 mm (0.006 to 0.08 in) there may be some differences in min and max plate sizes. For more information, please consult your Kodak representative.
The platesetter is a Class 1 Laser Product and fully complies with EN60825-1 and US Federal Regulations 21 CFR 1040.10 - CDRH.